hi, i just got my pro lens in today and I started ghetto rigging it with my old standard lens projector. So i cut the 650mm fresnel and put it where the old 330mm was and put the pro lens out about 650mm away from the LCD, just like the standard lens setup. Well apparently that isn't correct because the only thing that gets projected like that is the center of the bulb, So i was wondering if anybody could please tell me the correct placement of all the stuff(fresnels, LCD, lens) in the pro lens setup.

This may help http://www.lumenlab.com/forums/index.php?showtopic=9785&hl=

DJ

I'm still lost. I flipped the Lens around, i changed the order of the fresnels so that the placement was almost that of the unsplit layout and i'm still getting the same projected bulb.

I also haven't cut down the 220mm fresnel that came with the pro lens, i'm still using the old one i got from 3dlens.com, would that have anything to do with it?

errrr....looks like i just cut the wrong fresnel

OOPs

You should still be able to use it.

DJ