hi im am now on the part where i think about the cooling of my pj
here is what i might use(one of them)
2 evercools from ll
and the ones in the pic
sorry for the bad pic i oculd not find the cam so i had to use my brothers cam phine.

here zoomed in pic.

the big fan that has a red blade came from a freezer i took apart 2 years ago and i just kept it around just for the hell of it and now i might be able to use it
the black one came from a box that had a cam vcr

LOL that orange thing looks like a boat propeller.

lol
sorry no room to show the other fan spec but let me tell u them

nmb
modle 3115FS-12T-B10
115V-AC 50/60Hz
1 phase 07/.07A

The key is quiet.
so if you have your heart set on one of those, or an AC fan in general.. I'd reccomend the quietest one.

i am takeing the fan with red blads out.
i want to use the black one.
but i was wondering if it by its self would be enough
or should i use 1 evercool and the black one?

the black one is a nmb fan here are the specs. o and it is ac so thats a +

Part Number= 3115PS-12T-B10
Size(in)= 3.15
Thickness(in)= 1.50
Rating Voltage(V)= 115
Current(A)= 0.055
Speed(min⁻¹)= 1900
Air Flow(CFM)= 19.42
Static Pressure(in H₂0)= 0.086
Noise(dB)= 25.0
Frequency(Hz)= 60

20cfm is no where near enough. I wouldn't even bother with the black one.

My suggestion would be to get either an evercool or two, or go with one or two 120mm fans. In my experience, you really want at least 80cfm.

o wow lol i c

im just going to go with the simple way and get one evercool. do i really need 2 evercools? i don't know y people use 2 no need?

Apparently Evercools aren't as good as a 120mm fan when inside a PJ enclosure, they don't have enough oomph to pull air through the contricted air pathways. From what others have demonstrated here, your PJ will overheat with just one evercool. You'll either need two of them or a good 80cfm 120mm fan instead.

ok thank u very much im going to place an order for 2 evercools