I came across a good deal on a Cornea 15" lcd monitor with the following specs and was wondering if it is suitable for use in a projector.


PANEL
Size 15" (38.1 cm)
Pixel Pitch (h × v) 0.297mm × 0.297mm
Viewing Angle Left:+75°, Right:-75°, Up: +55°, Down:-70°
Liquid Crystal Mode Normally White (TN)
Display Area (h × v) 11.97" × 8.98" (304.12 mm × 228.09 mm)
Display Colors 16.7 million
Contrast Ratio (typical) 300:1
Brightness (typical) 250 cd/m2
Response Time (typical) 25 ms
Scanning Frequency Horizontal 31-61 Khz
Vertical 56-75 Khz
Lamp Life Time (typical) 50,000 Hrs
Recommended Resolution 1024 × 768 / 60 Hz
Surface Treatment Anti-glare, Hard-Coating 3H

any feedback would be helpful.

majed