Thought I would post some of my projector here. I already have a thread running in the plogs area. If you are on the fence about getting the guide....don't hesitate the information in the forums is invaluable and will save you time and money...Anyhoo
Standard lenses
400 watt MH bulb and ballast
Samsung 512N
Slusher box
many other items from Radio Shack and Home depot

Here is a shot from the level of the focus box
http://www.lumenlab.com/forums/uploads/pos...-1111198296.jpg


edit: I will add some construction photos and results as I figure how to do this correctly...........Please stand by.

Here are some shots of the projector in various stages

another

another

more

shot of the rear with connections

one of the results......more to come later, this is fun

Looks like you have good construction on your box. Plz post pics of the panel and lens mounting.

One question, do you need the filter on the fan cover if it is blowing through it? Or is it to block light?

I love the slider for your bulb.

I will get you some pics of the mountings....although pretty much standard fare for most units on this site. The bulb mounting I can not take credit for, saw it on another log and thought it would be great for adjustment and it is. Went to Home Depot tonight and purchased the attic fan thermostat and installed it. Did not think I would want it but stayed up late last night to watch the end of the Indians-White Sox game went to 10 innings and I had to stay up to wait for the projector to cool. With this (as many here have done) the fans will shut themselves down. The filter on the fan does not really block much light but the fan being down and below the reflector not much comes out---real reason for the cover is to keep small fingers out ( I have a very inquisitive 5 year old).