Hi.

I posted about this before but no reply. I really need help opening my LG Flatron L1515s.

I have removed 3 screws and there aren't anymore screws to remove. There are no plastic clips. Now what do I do?

Someone please help: my lens kit is here and I need to strip my LCD...

Thanks everyone.

If you are sure there are no more screws lurking, take something like a credit card (you don't need) and go around the edge of the enclosure and pop it apart. Some monitors have little slots in the enclosure around the edge, where you are to insert a small screwdriver to release some holding tabs. Look it over real good for anything like that.

ufmatt00 has stripped that panel before, so you might wanna contact him if you're having trouble. He's stated overall it was an easy strip, but take care not to remove the reflective polarizing film from the LCD. Make sure there are no screws left. Sometimes they're hidden under labels. Then do what brain suggested.

Thanks guys.

I got the front piece off. Now the LCD is sitting in the back piece.
There were on the inside of it. I just had to put a little bit of pressure on the corners and it came off. I only put very slight pressure though.

I didn't want to put any pressure on it because I was afraid of breaking it since I haev heard others that have broken their LCD by pushing too hard and being rough with it.

I will post pictures of how it comes apart if someone wants me to. Might make it easier for other people with the same monitor.