Is there much difference between the LL Vue eBallast versus the eBallasts available through Coral Vue associates?

Also wondered about warranty on the LL eBallast. Coral Vue says they have 3 year warranty on their eBallasts.

History: I built a projector a few years ago with the LL lenses and a 17" LCD. Has been working great with thousands of hours of running time.

Thanks

Would this ballast work?
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewIt...em=280407931874

I also have the ushio 400W bulb.

The LL ballast is essentially a re-badged Coralvue, so it'd work just fine.

The one that you listed should be fine.

Thanks SupraGuy.

I got a used Vue Technologies MH-400W e-ballast. The red one. It did not ome with a cord for the lamp. Does anyone know which wire from the HP type connector goes to which part of the mogul base? I don't want to damage anything!

I do have a computer power cord that I can cut up and use for the job but unsure of which wire goes where.

Thanks

It doesn't matter. There will be 2 wires for the output, either one can go to either side of the socket.

If they're colour coded blue/brown, then I'd probably put the blue to the center pin, and brown to the outside, since that's a tiny bit safer (But if that's your safety margin, then I feel worry for whomever is underwriting your life insurance.)

If they're coded black/white, then it's black to the center.

LOL. I got it working and I am back in business!

Thanks!