The cable with the connector:
The input on the board:
Thanks.
Full Version: Monitor Cable Identification (not FFC?)
Alright, so I recently bought a NCR 12" Model 5942-1800 monitor and unfortunately I ran into a problem with what I suspect to be an alternative cable to FFC. I did some searching and I could not find out what kind of connector it is. It is a 10 pin per side connector (plus the inside pins, but I don't think those are used?). Does anyone recognize this connector type? I'm hoping I can find an extension for it so I don't have to buy another monitor. Attached are some pictures.
The cable with the connector:
The input on the board:
Thanks.
The cable with the connector:
The input on the board:
Thanks.
QUOTE (stupid939 @ Oct 27 2009, 01:44 PM) 
Alright, so I recently bought a NCR 12" Model 5942-1800 monitor and unfortunately I ran into a problem with what I suspect to be an alternative cable to FFC. I did some searching and I could not find out what kind of connector it is. It is a 10 pin per side connector (plus the inside pins, but I don't think those are used?). Does anyone recognize this connector type? I'm hoping I can find an extension for it so I don't have to buy another monitor. Attached are some pictures.
The cable with the connector:
The input on the board:
Thanks.
The cable with the connector:
The input on the board:
Thanks.
i ran into one of those on my old 15" ohp build, never did find a solution... It meant that the controller board was sticking off to the side, upside down and not where i wanted it to be.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.