hello every body i writing from mexico my english isn't good apreciate your comprention.
well i wish to show you my work on a projector i start about 1 month ago and try to insert a pictures
i start using a automotive lcd tv 12.1 inches across with ir audio and fm transmiter 1024 pixels
and a dvd player automotive (audiobahn) one tv tuner . triplet 345mm , 2 fresnel lens , iluminating box:
halogen lamp 600watts (momentary) because is very hot and hard to control the heat
put a laminated glass and a tempered glass but need more ventilation only one motor installed and think need more
if not maybe ican use like oven jajajajajaj don't tru i spect put a hqi 400w if i found it

some body know how to upload images ? need help

I bet you have to wear sunglasses to watch movies. Looking forward to see your pictures.

Right under where you write the post, look right below the box on the right you'll see a green box that says UPLOAD.. a button right next to it that says BROWSE.. just click on it and then upload whatever you have on your file that you want to share. Once you're done with that, then use that green UPLOAD button. Then you're all good to go.

I bet in a few minutes Quasi_Mojo can explain this in a better way if I didn't make any sense.

The LL forums only allow for a total of 110Ks worth of attached images per post. You can host the images on free photo sites and then provide the links to the full sized images.
See: How do I upload pictures to the Lumenlab Forum?, A quick How-To guide

I've noticed that something is a bit wonky with the Insert Image button lately, so rather than using that, you can simply insert the URL into the standard forum image tags:

don't letme insert file says this:
Sorry, dynamic pages in the [IMG] tags are not allowed

can i put links here to my pictures? there are in imageshack, and how many links permit because don't let me insert any !!!!
i have upload 50 pictures in imageshack

I think you have to convert your image to .GIF or something appropriate. Open up your picture in paint and then "SAVE AS" in the menu to open a tab box. There is "File Name" you have to type in to save as, right below that.. there's a "Save as Type".. change that to .GIF or an appropriate program mentioned in the error box. Click SAVE. Then you're OK to go. Try that step again Quasi_Mojo or I gave you earlier. I'm sure someone else will come along and have a better way to explain if you're still stuck.

i try converting to gif format but exeed the 110k only 1 picture example (220k)
trying with the upload but dont work, whatever i gone to wait to a better way to upload good quality of pictures if someone elese knows.
thanks for you help instead !

If it's too large, go back to paint. Bring up the picture. Click IMAGE on the menu bar. Click on STRETCH/SKEW. Reduce HORIZONTAL to lower percentage than 100% and then reduce VERTICAL using the same percentage you used for horizontal. Save again under GIF. Then try again. That's one of the methods you can use. Sorry if I'm taking over your thread. I just wanna help.

Post the link to your imageshack folder.
I'll see if I can figure it out.

there are my images if "quasi " can do soe thing with that i apreciate !!

http://img16.imageshack.us/my.php?image=img0005gmp.jpg

If you want people to see the full sized pictures, use the "Forum" link provided to the left of your pictures.



Just copy and paste that link into your post. Remember, you can only link to 10 pictures per post. If you have more than that, you have to create another post for the next 10. You also have to wait 1 minute between posts. If you get an error telling you that you can't post, wait a little longer and try again.

This is what your linked picture will look like:


However, if you want to post a thumbnail picture, so that people can click on the picture to view the full-sized image, you need to click on the "Thumbs" tab next to your imageshack picture and then copy and paste the text in the "Forum" section shown there.



Linking to the pictures using a clickable thumbnail image is better for viewers as they don't have to wait for all of the full sized images to load.

This is what the thumbnail would look like:


I would recommend you create a PLOG and post your images there. If you don't have the ability to create a PLOG in the PLOG section, create one here and then PM a Mod and ask them to move it to the PLOG section for you.

this my firs attempt i think works thanks "quasi"

there is the transmiter frecuency i use

there is the lcd setup settings

projection test

focuser made by pvc 2" nut

okay i learning is best like this

this is the video controller for the lcd there is 2 video inputs

there other views of the projector, split the cover for adjustements porpouses


this is the ilumination chamber and put a laminated glass and a tempered glass too and i been working in the ventilation system


the provision lcd monitor where take the lcd 12.1 inches across

another pictures of construction

here is the infrared transmiter and the fm antena (white wire )
the installation of this 2" nut used like focuser

how can i pm a moderator and who is it ?
need help for move my pitures to a plog section
quasi mojo recomend me that action thanks!!!