I was just browsing a local computer stores web site when i came across the Asus VW161D 16" Widescreen LCD monitor.

Panel Size: 15.6“ Wide Screen
True Resolution: WXGA 1366x768
Pixel Pitch: 0.252mm
Brightness(Max): 250 cd/㎡
Contrast Ratio (Max.): 2000 :1 (ASCR)
Display Color: 16.7M
Viewing Angle (CR≧10): 90°(H)/65°(V)
Response Time: 8 ms

http://www.asus.com/products.aspx?modelmen...l3=662&l4=0

I wonder if this could be used with the 15" LL projector kit ? The store i usually buy my computer gear from has it for AU$128.

A 15.4 or 15.6 LCD (or larger) is too big for the S15 fresnels (which are 319mm x 252.4mm).

For more reading, check out the following Google search: site:lumenlab.com 15.4 15.6 S15 Pro

Well did you give it a try with the standard fs?
Did you upgrate the kit?
why not install it with the standard set and adjust the margins or use it as 4:3
its cheaper than many 15" and has upgrade capabilities

This doesn't seem to belong in the "projectors based on small panels" section. Should I move it?