You asked this same question back in June:
http://www.lumenlab.com/forums/index.php?showtopic=26137-------------------------------------------
Below is a little information that I like to pass along to new members:
The best place to start is
The Lumenlab PRO DIY Projector Guide V.3.
Once you have a grasp of the basics, you might want to peruse the pinned topics at the top of the
Beginner's Forum. This is also where you should go to create your own threads when you have questions.
Then you can move on to the pinned topics of the
DIY Video Projector Design forum and the
FAQ section.
When you're ready, you'll need to decide what parts (LCD, Fresnels and triplet) you'll need. To do that, you can use the handy
FocalCalc. FocalCalc will help you determine your enclosure measurements and will let you experiment with different parts before buying anything. This will also tell you how far from the screen your projector needs to be (throw distance).
When you start your build, you can
create your own PLOG (Projector Log) to chart your progress and to ask questions about your particular build.
I've found that
Google Sketchup is handy to use to design and visualize what your projector will look like. And best of all, there's a free version you can use. If you go to the Google 3D Warehouse and do a search for
Lumenlab, you'll find that some members have uploaded parts that they have modeled so you can download them and use them in your own model.
A lot of the questions you might have probably have already been asked and answered several times. While most of us do not mind answering some of the same questions repeatedly, you might get more satisfaction in finding the answers yourself. Unfortunately, the built-in Search feature on most of these online forums is quite limited in what it can do. You might find it easier to search using Google using the "site" parameter. Below is an example:
Google search:
site:lumenlab.com +"12.1" projector +plansYou can find other parameters by clicking the Google links in my signature.
You might run across a "quirk" when searching using Google, however. If you notice the thread looking "wonky" like
this image, simply go up the the top right corner of the thread and click on
Options and then
Switch to: Standard.
I hope this gets you started on the road to your new obsession and I look forward to seeing your progress.