I just dismantled my WUXGA projector and am parting it out. Need the funds to finish my shnazzy new 10.9" build that I'm putting together (aka, to buy the 10.9" LCD).

Here are the parts that I have rounded up for sale so far.

-MST WUXGA controller from Johnzo1995 - SOLD
-2 15.4 WUXGA LCDs - #1 stripped Sharp - antiglare removed, acouple blemishes in the screen from the light sourceSOLD
#2 LG unstripped - damaged when shipped to me. Backlight works, but has vertical lines (15-20). Good for backlight or as mock up $20
-400W HQI osram and ceramic base - pending
-S51 coil magnetic ballast, cap and ignitor - pending
-22" beseler projection lens - SOLD
-20" beseler projection lens - SOLD
-6" x 6" FS mirror - $10
-630mm fresnel lens cut to size for 15.4 screen - SOLD
-380mm fl doublet (80mm diameter) $10
-1 rectangular lens (121mm fl) - free if you get something else and want them
-small aluminum reflectors, same as above

Click to view attachment
MST controller and LG 15.4 WUXGA panel (broken with vertical lines)
Click to view attachment
Click to view attachment
Stripped 15.4 Sharp, using the backlight from the LG panel sitting underneath. Right side then the left side.

Click to view attachment
Bulb, base and reflector, (approx 1000 hours max)
Click to view attachment
S51 coil ballast, 1000 hours too
Click to view attachment
2 120mm fans, they are DC and pretty quiet
Click to view attachment
6x6" FS mirror.
Click to view attachment
22" Beseler, 4.5" diameter, 6" long
20" Beseler, 2.5" diameter, 4" long

Click to view attachment
630mm fresnel cut to size, can be shipped with the frame if you'd like. I have another black frame of the same size if interested.
Click to view attachment
Rectangular lens, 380mm doublet, aluminum radius reflectors

Sent pm about buying 20" beseler, 630mm fl fresnel, plus the mounting frame(s) you have. Dibs.

Confirmed. 20" beseler, fresnel, frames are now spoken for.

You mentioned that "#1 stripped Sharp - antiglare removed, acouple blemishes in the screen from the light source $50" - can you clarify? Is the backlight bad, or just the photo, or would the LCD display defects if used in the projector?

Also interested in the controller that goes along with it. Let me know, thanks.

20" beseller sold
630mm fresnel sold