Anybody have the dimensions for a 19 inch widescreen version of the Hass projector?

I just want some rough measurements so I can start making the cabinet while waiting on the lamp and fresnels to ship from the LL store. I'll build in lots of adjustability since I'm going to at least initially use a 17in monitor, but I want the ability to upgrade if the monitor I'm planning on using has issues.

Tried searching but the threads either have nice pics and no dimensions or the search tosses back an error that I'm using too small of words like "19" and "hass" with plans and inches
Thanks for the help.

18"wide, 38.5" long, 15" tall at center tappers down to 7.5" on each end. these are inside dimensions.

Perfect. Exactly what I needed.

Thank you.

what are the iside diamensions when i juse a 17"

Thanks,

Most 17" panels are 15" wide in their metal frame so I make the enclosure 16" wide I.D. I use 1/2" spacer bars to secure everything to and the U-Sled with rails to hold the panel. I make the fresnel frames 15" x 13" to hold the collimator fresnel which I cut to 12" x 14". this drawing says 15" wide but go with 16" and make the support dowels 16.5" to fit in the 1/4" deep spots in the sides.

Click to view attachment