i new to all this cnc machine stuff so if anyone could help me out or push me in the right direction i would greatly appreciate it

first off i would like to design and build my own cnc machine for various jobs mainly engraving cause i'm starting a wrestling belt making buissness but i don't know how to design build or even control a cnc machine but what i need to figure it out is step by step instructions with pictures on designing building and controling a cnc machine now being that i am a begiiner to all this i would need instructions that are very detailed and understandable for me i've looked every where for books or blueprints or step by step instructions on building one but all i've found are guides that aren't detailed enough for me to understand and that cost a arm and leg themselves to buy so if anyone could help me out or has any free instructions on building a cnc machine i would greatly appreciate it cause i've been looking for years now and i really wanna build one to use so please help if you can thanks

stu99

The Best Place to look is CNCZone.com (you will see alot of my work there also over 95,800 views on my machine so far and climbing), but be warned there are many, many variables you will need to learn, from proper motors, controllors, material to use for your machine and so on. best thing is like here if you want to build a projector learn from reading, on the Zone there are forums which will explain the basics, and also look on the Mach2/3 page lots of info there also, it is the leading controlor software IMO.
http://www.machsupport.com/artsoft/index/index.htm

joe