Just in case anyone needs this info. As you know, your video card (most dual video cards) will not readily recongnize the PS1 screen. This VGA imposter will make your computer think there is a monitor there and will make connecting it a snap. I will include 3 pics to aid. Basically, it a VGA input jack with wit three 75ohm resistors in it. Each is soldered one end from the Red output to the Red ground, Blue to blue ground, and Green to Green ground. Very simple and will save you time in the end. Just plug it into the end of your VGA cable. Go to Screen settings and extend your desktop. The Computer thinks there is a screen there and that VGA port is now active. Hope this helps someone.

Pic 3