hello,
I was reading the forum on fl care and found a suggestion to encapsutate the fl in glass.
this would keep out the dust and make cleaning them less of a chore.

My q is, can both fl's and also the lcd be encapsluated, and if so does the quality of the glass make a diff ?
I would think that defects in any lens system will get magnified.

Also if this is recommended, is there a trick to getting the glass plates "parallel" to the surface they encapsulate ?

thx

this has been discused several several times, in the forums, do a search, and if not get the guide and access to the protected forumns and you will be able to awnser alot of guestions you have as well as some you have not thought of yet..

Joe

He's got the guide Joe he's in the protected forums. Sin, get the thinnest glass you can, 1/16". Just clean it scrupulously with pure alcohol and sandwich your lens in it. Remember the back piece of glass should be tempered.

oh wow this is the protected forum.. hahaha sorry bout that.

this is how i did my fresnels...

http://www.lumenlab.com/forums/index.php?showtopic=803&hl=

Hey Brain,
thanks for lookin out for me
thanks joe for the fresnel link

peace

sorry bout that man, but hope the link helped ya? let me know

joe