Full Version: Polarizer lifted a little.
Basically in the corner of my LCD when i was removing the AG on my dell e153fp, the polarizer lifted from the corner. it isn't major but still manages to annoy me :angry: Is there anyway of sticking it back down to the corner by means of glue or heat?
Well thanks for the help guys 
anywayz i decided to go out and just do somethin about it... I ended up using glue that consists of apoxy resin mixed with polymide or somethin like that. I then used a toothpick and applied a thin layer down each side of the corner, let dry and fired the screen up and the results were great. doesn't appear to be faded or anythin. 
anywayz i decided to go out and just do somethin about it... I ended up using glue that consists of apoxy resin mixed with polymide or somethin like that. I then used a toothpick and applied a thin layer down each side of the corner, let dry and fired the screen up and the results were great. doesn't appear to be faded or anythin.
Looks like you fell through the cracks ndace1.
Hope yer fix holds up.
Anyway, how much lifted exactly?
Hope yer fix holds up.
Anyway, how much lifted exactly?
About an inch from the corner... but it is workin fine now
Just seeing if photo worked... lol
doesn't work neways 
QUOTE (ndace1 @ Apr 19 2006, 11:27 PM) 
doesn't work neways
Huh? 
If yer havin' trouble posting pics read the wiki guide. Near the end are some hints for posting pics.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.