My projected image appears to be "wedge" shape to it. The Left side of the image is straight but has a angle form the top to the bottom that slopes this way \. It's a straight line, but has that angle going to the bottom of the screen. I thought it was the LCD and played with the location and position woithout much luck. Any ideas would be great.

If you have the projector at an angle , the resulting projection will look like that.

Sometimes also if the fresnels aren't square to the Lcd it will result in that effect also.

Traynor: You figure this out yet? Make sure everything is properly aligned. If you're still confused do a search for "keystone" on this forum.

Yep,

A little adjustment in the lens made all the difference.
Thanks,
Traynor